.
-as of [15 FEBRUARY 2024]–
.
.
.
(chemical formula CH3CHOHCH3)
.
(IUPAC name propan-2-ol)
(and also called ‘iso-propanol’ or ‘2-propanol’)
.
*’iso-propyl alcohol’ is a [colorless/flammable chemical compound] with a ‘strong odor’*
.
As an isopropyl group linked to a hydroxyl group, it is the simplest example of a secondary alcohol, where the alcohol carbon atom is attached to two other carbon atoms. It is a structural isomer of 1-propanol and ethyl methyl ether
It is used in the manufacture of a wide variety of industrial and household chemicals and is a common ingredient in products such as antiseptics, disinfectants, hand sanitizer and detergents
Well over one million tonnes is produced worldwide annually
.
Properties
Isopropyl alcohol is miscible in water, ethanol, and chloroform.
It dissolves ethyl cellulose, polyvinyl butyral, many oils, alkaloids, gums and natural resin
Unlike ethanol or methanol, isopropyl alcohol is not miscible with salt solutions and can be separated from aqueous solutions by adding a salt such as sodium chloride
The process is colloquially called salting out, and causes concentrated isopropyl alcohol to separate into a distinct layer.[10]
Isopropyl alcohol forms an azeotrope with water, which gives a boiling point of 80.37 °C (176.67 °F) and a composition of 87.7% by mass (91% by volume) isopropyl alcohol. Alcohol mixtures have depressed melting points.[10] It has a slightly bitter taste, and is not safe to drink.[10][11]
Isopropyl alcohol becomes increasingly viscous with decreasing temperature and freezes at −89 °C (−128 °F).
Isopropyl alcohol has a maximal absorbance at 205 nm in an ultraviolet-visible spectrum.[12][13]
Reactions[edit]
Isopropyl alcohol can be oxidized to acetone, which is the corresponding ketone. This can be achieved using oxidizing agents such as chromic acid, or by dehydrogenation of isopropyl alcohol over a heated copper catalyst:
(CH
3)
2CHOH → (CH
3)
2CO + H2
Isopropyl alcohol is often used as both solvent and hydride source in the Meerwein-Ponndorf-Verley reduction and other transfer hydrogenation reactions. Isopropyl alcohol may be converted to 2-bromopropane using phosphorus tribromide, or dehydrated to propene by heating with sulfuric acid.
Like most alcohols, isopropyl alcohol reacts with active metals such as potassium to form alkoxides that can be called isopropoxides. The reaction with aluminium (initiated by a trace of mercury) is used to prepare the catalyst aluminium isopropoxide.[14]
History[edit]
In 1920, Standard Oil first produced isopropyl alcohol by hydrating propene. Isopropyl alcohol was oxidized to acetone for the preparation of cordite, a smokeless, low explosive propellant.[15]
Production[edit]
In 1994, 1.5 million tonnes of isopropyl alcohol were produced in the United States, Europe, and Japan.[16] It is primarily produced by combining water and propene in a hydration reaction or by hydrogenating acetone.[16][17] There are two routes for the hydration process and both processes require that the isopropyl alcohol be separated from water and other by-products by distillation. Isopropyl alcohol and water form an azeotrope, and simple distillation gives a material that is 87.9% by mass isopropyl alcohol and 12.1% by mass water.[18] Pure (anhydrous) isopropyl alcohol is made by azeotropic distillation of the wet isopropyl alcohol using either diisopropyl ether or cyclohexane as azeotroping agents.[16]
Biological[edit]
Small amounts of isopropyl alcohol are produced in the body in diabetic ketoacidosis.[19]
Indirect hydration[edit]
Indirect hydration reacts propene with sulfuric acid to form a mixture of sulfate esters. This process can use low-quality propene, and is predominant in the USA. These processes give primarily isopropyl alcohol rather than 1-propanol, because adding water or sulfuric acid to propene follows Markovnikov’s rule. Subsequent hydrolysis of these esters by steam produces isopropyl alcohol, by distillation. Diisopropyl ether is a significant by-product of this process; it is recycled back to the process and hydrolyzed to give the desired product.[16]
CH3CH=CH2 + H2O H2SO4⟶ (CH3)2CHOH
Direct hydration[edit]
Direct hydration reacts propene and water, either in gas or liquid phase, at high pressures in the presence of solid or supported acidic catalysts. This type of process usually requires higher-purity propylene (> 90%).[16] Direct hydration is more commonly used in Europe.
Hydrogenation of acetone[edit]
Isopropyl alcohol can be prepared via the hydrogenation of acetone; however, this approach involves an extra step compared to the above methods, as acetone is itself normally prepared from propene via the cumene process.[16] IPA cost is primarily driven by raw material (acetone or propylene) cost. A known issue is the formation of MIBK and other self-condensation products. Raney nickel was one of the original industrial catalysts, modern catalysts are often supported bimetallic materials.
Uses[edit]
In 1990, 45,000 metric tonnes of isopropyl alcohol were used in the United States, mostly as a solvent for coatings or for industrial processes. In that year, 5400 metric tonnes were used for household purposes and in personal care products. Isopropyl alcohol is popular in particular for pharmaceutical applications,[16] due to its low toxicity. Some isopropyl alcohol is used as a chemical intermediate. Isopropyl alcohol may be converted to acetone, but the cumene process is more significant.[16]
Solvent[edit]
Isopropyl alcohol dissolves a wide range of non-polar compounds. It evaporates quickly and the typically available grades tend to not leave behind oil traces when used as a cleaning fluid unlike some other common solvents. It is also relatively non-toxic. Thus, it is used widely as a solvent and as a cleaning fluid, especially for situations where there can be oils or other oil based residues which would not be easily cleaned with water, conveniently evaporating and (depending on water content, and other potential factors) posing less of a risk of corrosion or rusting than plain water.
Together with ethanol, n-butanol, and methanol, it belongs to the group of alcohol solvents.
Isopropyl alcohol is commonly used for cleaning eyeglasses, electrical contacts, audio or video tape heads, DVD and other optical disc lenses, removing thermal paste from heatsinks on CPUs and other IC packages
.
Intermediate[edit]
isopropyl alcohol is esterified to give isopropyl acetate, another solvent. It reacts with carbon disulfide and sodium hydroxide to give sodium isopropylxanthate, a herbicide and an ore flotation reagent.[20] Isopropyl alcohol reacts with titanium tetrachloride and aluminium metal to give titanium and aluminium isopropoxides, respectively, the former a catalyst, and the latter a chemical reagent.[16] This compound may serve as a chemical reagent in itself, by acting as a dihydrogen donor in transfer hydrogenation.
Medical[edit]
Rubbing alcohol, hand sanitizer, and disinfecting pads typically contain a 60–70% solution of isopropyl alcohol or ethanol in water. Water is required to open up membrane pores of bacteria, which acts as a gateway for isopropyl alcohol. A 75% v/v solution in water may be used as a hand sanitizer.[21] Isopropyl alcohol is used as a water-drying aid for the prevention of otitis externa, better known as swimmer’s ear.[22]
Early uses as an anesthetic[edit]
Although isopropyl alcohol can be used for anesthesia, its many negative attributes or drawbacks prohibit this use. Isopropyl alcohol can also be used similarly to ether as a solvent[23] or as an anesthetic by inhaling the fumes or orally. Early uses included using the solvent as general anesthetic for small mammals[24] and rodents by scientists and some veterinarians. However, it was soon discontinued, as many complications arose, including respiratory irritation, internal bleeding, and visual and hearing problems. In rare cases, respiratory failure leading to death in animals was observed.
Automotive[edit]
Isopropyl alcohol is a major ingredient in “gas dryer” fuel additives. In significant quantities, water is a problem in fuel tanks, as it separates from gasoline and can freeze in the supply lines at low temperatures. Alcohol does not remove water from gasoline, but the alcohol solubilizes water in gasoline. Once soluble, water does not pose the same risk as insoluble water, as it no longer accumulates in the supply lines and freezes but is dissolved within the fuel itself. Isopropyl alcohol is often sold in aerosol cans as a windshield or door lock deicer. Isopropyl alcohol is also used to remove brake fluid traces from hydraulic braking systems, so that the brake fluid (usually DOT 3, DOT 4, or mineral oil) does not contaminate the brake pads and cause poor braking. Mixtures of isopropyl alcohol and water are also commonly used in homemade windshield washer fluid.
Laboratory[edit]
As a biological specimen preservative, isopropyl alcohol provides a comparatively non-toxic alternative to formaldehyde and other synthetic preservatives. Isopropyl alcohol solutions of 70–99% are used to preserve specimens.
Isopropyl alcohol is often used in DNA extraction. A lab worker adds it to a DNA solution to precipitate the DNA, which then forms a pellet after centrifugation. This is possible because DNA is insoluble in isopropyl alcohol.
Safety[edit]
Isopropyl alcohol vapor is denser than air and is flammable, with a flammability range of between 2 and 12.7% in air. It should be kept away from heat and open flame.[25] Distillation of isopropyl alcohol over magnesium has been reported to form peroxides, which may explode upon concentration.[26][27] Isopropyl alcohol causes eye irritation[25] and is a potential allergen.[28][29] Wearing protective gloves is recommended.
Toxicology[edit]
Isopropyl alcohol, via its metabolites, is somewhat more toxic than ethanol, but considerably less toxic than ethylene glycol or methanol. Death from ingestion or absorption of even relatively large quantities is rare. Both isopropyl alcohol and its metabolite, acetone, act as central nervous system (CNS) depressants.[30] Poisoning can occur from ingestion, inhalation, or skin absorption. Symptoms of isopropyl alcohol poisoning include flushing, headache, dizziness, CNS depression, nausea, vomiting, anesthesia, hypothermia, low blood pressure, shock, respiratory depression, and coma.[30] Overdoses may cause a fruity odor on the breath as a result of its metabolism to acetone.[31] Isopropyl alcohol does not cause an anion gap acidosis, but it produces an osmolal gap between the calculated and measured osmolalities of serum, as do the other alcohols.[30]
Isopropyl alcohol is oxidized to form acetone by alcohol dehydrogenase in the liver[30] and has a biological half-life in humans between 2.5 and 8.0 hours.[30] Unlike methanol or ethylene glycol poisoning, the metabolites of isopropyl alcohol are considerably less toxic, and treatment is largely supportive. Furthermore, there is no indication for the use of fomepizole, an alcohol dehydrogenase inhibitor, unless co-ingestion with methanol or ethylene glycol is suspected.[32]
In forensic pathology, people who have died as a result of diabetic ketoacidosis usually have blood concentrations of isopropyl alcohol of tens of mg/dL, while those by fatal isopropyl alcohol ingestion usually have blood concentrations of hundreds of mg/dL.[19]
References[edit]
^ “Alcohols Rule C-201.1”. Nomenclature of Organic Chemistry (The IUPAC ‘Blue Book’), Sections A, B, C, D, E, F, and H. Oxford: Pergamon Press. 1979. Designations such as isopropanol, sec-butanol, and tert-butanol are incorrect because there are no hydrocarbons isopropane, sec-butane, and tert-butane to which the suffix “-ol” can be added; such names should be abandoned. Isopropyl alcohol, sec-butyl alcohol, and tert-butyl alcohol are, however, permissible (see Rule C-201.3) because the radicals isopropyl, sec-butyl, and tert-butyl do exist.
^ Nomenclature of Organic Chemistry : IUPAC Recommendations and Preferred Names 2013 (Blue Book). Cambridge: The Royal Society of Chemistry. 2014. p. 631. doi:10.1039/9781849733069. ISBN 978-0-85404-182-4.
^ “Isopropanol_msds”. chemsrc.com.
^ Reeve, W.; Erikson, C. M.; Aluotto, P. F. (1979). “A new method for the determination of the relative acidities of alcohols in alcoholic solutions. The nucleophilicities and competitive reactivities of alkoxides and phenoxides”. Can. J. Chem. 57 (20): 2747–2754. doi:10.1139/v79-444.
^ Jump up to: a b Yaws, C.L. (1999). Chemical Properties Handbook. McGraw-Hill. ISBN 978-0-07-073401-2.
^ Jump up to: a b c NIOSH Pocket Guide to Chemical Hazards. “#0359”. National Institute for Occupational Safety and Health (NIOSH).
^ Jump up to: a b c “Isopropyl alcohol”. Immediately Dangerous to Life or Health Concentrations (IDLH). National Institute for Occupational Safety and Health (NIOSH).
^ “Isopropanol”. PubChem. Retrieved February 10, 2019.
^ Doolittle, Arthur K. (1954). The Technology of Solvents and Plasticizers. New York: John Wiley & Sons, Inc. p. 628.
^ Jump up to: a b c The Merck Index (10th ed.). Rahway, NJ: Merck & Co. 1983. p. 749. ISBN 9780911910278.
^ Logsden, John E.; Loke, Richard A. (1999). “Propyl Alcohols”. In Jacqueline I. (ed.). Kirk- Concise of Chemical Technology (4th ed.). New York: John Wiley & Sons, Inc. pp. 1654–1656. ISBN 978-0471419617.
^ “Isopropyl Alcohol, , Suitable for Liquid Chromatography, Extract/, UV-Spectrophotometry”. VWR International. Retrieved 25 August 2014.
^ “UV Cutoff” (PDF). University of Toronto. Retrieved 25 August 2014.
^ Young, W.; Hartung, W.; Crossley, F. (1936). “Reduction of Aldehydes with Aluminum Isopropoxide”. Journal of the American Chemical Society. 58: 100–102. doi:10.1021/ja01292a033.
^ Wittcoff, M. M.; Green, H. A. (2003). Organic chemistry principles and industrial practice (1. ed., 1. reprint. ed.). Weinheim: Wiley-VCH. p. 4. ISBN 978-3-527-30289-5.
^ Jump up to: a b c d e f g h i Papa, A. J. “Propanols”. Ullmann’s Encyclopedia of Industrial Chemistry. Weinheim: Wiley-VCH. doi:10.1002/14356007.a22_173.
^ Logsdon, John E.; Loke, Richard A. (December 4, 2000). “Isopropyl Alcohol”. Kirk-Othmer Encyclopedia of Chemical Technology. Kirk‑Othmer Encyclopedia of Chemical Technology. John Wiley & Sons, Inc. doi:10.1002/0471238961.0919151612150719.a01. ISBN 978-0471238966.
^ CRC Handbook of Chemistry and Physics, 44th ed. pp. 2143–2184.
^ Jump up to: a b Petersen, Thomas H.; Williams, Timothy; Nuwayhid, Naziha; Harruff, Richard (2012). “Postmortem Detection of Isopropanol in Ketoacidosis”. Journal of Forensic Sciences. 57 (3): 674–678. doi:10.1111/j.1556-4029.2011.02045.x. ISSN 0022-1198. PMID 22268588. S2CID 21101240.
^ “Sodium Isopropyl Xanthate, SIPX, Xanthate”. 3DChem.com. Retrieved 2012-06-17.
^ “Guide to Local Production: WHO-recommended Handrub Formulations” (PDF). World Health Organization. August 2009.
^ Otitis Externa (Swimmers Ear). Medical College of Wisconsin.
^ Burlage, Henry M.; Welch, H.; Price, C. W. (2006). “Pharmaceutical applications of isopropyl alcohol II. Solubilities of local anesthetics”. Journal of the American Pharmaceutical Association. 36 (1): 17–19. doi:10.1002/jps.3030360105. PMID 20285822.
^ Society for Experimental Biology and Medicine (1922). Proceedings of the Society for Experimental Biology and Medicine, Volume 19. p. 85.
^ Jump up to: a b “Isopropanol”. Sigma-Aldrich. 19 January 2012. Retrieved 6 July 2012.
^ Mirafzal, Gholam A.; Baumgarten, Henry E. (1988). “Control of peroxidizable compounds: An addendum”. Journal of Chemical Education. 65 (9): A226. Bibcode:1988JChEd..65A.226M. doi:10.1021/ed065pA226.
^ “Chemical safety: peroxide formation in 2-propanol”. Chemical & Engineering News. 94 (31): 2. August 1, 2016.
^ García-Gavín, Juan; Lissens, Ruth; Timmermans, Ann; Goossens, An (2011-06-17). “Allergic contact dermatitis caused by isopropyl alcohol: a missed allergen?”. Contact Dermatitis. 65 (2): 101–106. doi:10.1111/j.1600-0536.2011.01936.x. ISSN 0105-1873. PMID 21679194. S2CID 42577253.
^ McInnes, A. (1973-02-10). “Skin reaction to isopropyl alcohol”. British Medical Journal. 1 (5849): 357. doi:10.1136/bmj.1.5849.357-c. ISSN 0007-1447. PMC 1588210. PMID 4265463.
^ Jump up to: a b c d e Slaughter RJ, Mason RW, Beasley DM, Vale JA, Schep LJ (2014). “Isopropanol poisoning”. Clinical Toxicology. 52 (5): 470–8. doi:10.3109/15563650.2014.914527. PMID 24815348. S2CID 30223646.
^ Kalapos, M. P. (2003). “On the mammalian acetone metabolism: from chemistry to clinical implications”. Biochimica et Biophysica Acta (BBA) – General Subjects. 1621 (2): 122–39. doi:10.1016/S0304-4165(03)00051-5. PMID 12726989.
^ “Isopropyl alcohol poisoning”. uptodate.com. Retrieved 2017-10-10.
External links[edit]
CDC – NIOSH Pocket Guide to Chemical Hazards – Isopropyl alcohol
Environmental Health Criteria 103: 2-Propanol
en.wikipedia.org /wiki/Isopropyl_alcohol
Isopropyl alcohol
Contributors to Wikimedia projects18-23 minutes 12/21/2001
DOI: 10.1039/9781849733069, Show Details
Isopropyl alcohol
Skeletal formula of isopropyl alcohol
Ball-and-stick model of isopropyl alcohol
Isopropanol by Danny S.jpg
Names
Preferred IUPAC name
Propan-2-ol[2]
Other names
2-Propanol
Isopropanol[1]
Rubbing alcohol
sec-Propyl alcohol
2-Hydroxypropane
i-PrOH
Dimethyl carbinol
IPA
Identifiers
CAS Number
67-63-0 check
3D model (JSmol)
Interactive image
Beilstein Reference
635639
ChEBI
CHEBI:17824 check
ChEMBL
ChEMBL582 check
ChemSpider
3644 check
ECHA InfoCard 100.000.601 Edit this at Wikidata
Gmelin Reference
1464
KEGG
D00137 check
PubChem CID
3776
RTECS number
NT8050000
UNII
ND2M416302 check
UN number 1219
CompTox Dashboard (EPA)
DTXSID7020762 Edit this at Wikidata
show
InChI
show
SMILES
Properties
Chemical formula
C3H8O
Molar mass 60.096 g/mol
Appearance Colorless liquid
Odor Pungent alcoholic odor
Density 0.786 g/cm3 (20 °C)
Melting point −89 °C (−128 °F; 184 K)
Boiling point 82.6 °C (180.7 °F; 355.8 K)
Solubility in water
Miscible with water
Solubility Miscible with benzene, chloroform, ethanol, ether, glycerin; soluble in acetone
log P −0.16[3]
Acidity (pKa) 16.5[4]
Magnetic susceptibility (χ)
−45.794·10−6 cm3/mol
Refractive index (nD)
1.3776
Viscosity 2.86 cP at 15 °C
1.96 cP at 25 °C[5]
1.77 cP at 30 °C[5]
Dipole moment
1.66 D (gas)
Pharmacology
ATC code
D08AX05 (WHO)
Hazards
Occupational safety and health (OHS/OSH):
Main hazards
Flammable
GHS labelling:
Pictograms
GHS07: Exclamation mark GHS02: Flammable
Signal word
Danger
Hazard statements
H225, H319, H336
Precautionary statements
P210, P261, P305+P351+P338
NFPA 704 (fire diamond)
NFPA 704 four-colored diamond
1
3
0
Flash point Open cup: 11.7 °C (53.1 °F; 284.8 K)
Closed cup: 13 °C (55 °F)
Autoignition
temperature
399 °C (750 °F; 672 K)
Explosive limits 2–12.7%
Threshold limit value (TLV)
980 mg/m3 (TWA), 1225 mg/m3 (STEL)
Lethal dose or concentration (LD, LC):
LD50 (median dose)
12800 mg/kg (dermal, rabbit)[citation needed]
3600 mg/kg (oral, mouse)
5045 mg/kg (oral, rat)
6410 mg/kg (oral, rabbit)[7]
LC50 (median concentration)
53,000 mg/m3 (inhalation, mouse)[citation needed]
12,000 ppm (rat, 8 h)[7]
LCLo (lowest published)
16,000 ppm (rat, 4 h)
12,800 ppm (mouse, 3 h)[7]
NIOSH (US health exposure limits):
PEL (Permissible)
TWA 400 ppm (980 mg/m3)[6]
REL (Recommended)
TWA 400 ppm (980 mg/m3), ST 500 ppm (1225 mg/m3)[6]
IDLH (Immediate danger)
2000 ppm[6]
Safety data sheet (SDS) External MSDS
Related compounds
Related alcohols
1-Propanol, ethanol, 2-butanol
Supplementary data page
Isopropyl alcohol (data page)
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa)
check verify
(what is check☒ ?)
Infobox references
.
.
*👨🔬🕵️♀️🙇♀️*SKETCHES*🙇♂️👩🔬🕵️♂️*
.
.
.
.
.
💕💝💖💓🖤💙🖤💙🖤💙🖤❤️💚💛🧡❣️💞💔💘❣️🧡💛💚❤️🖤💜🖤💙🖤💙🖤💗💖💝💘
.
.
*🌈✨ *TABLE OF CONTENTS* ✨🌷*
.
.
🔥🔥🔥🔥🔥🔥*we won the war* 🔥🔥🔥🔥🔥🔥