-as of [24 NOVEMER 2024]–
.
-FRONT WALL-
-BACK WALL-
-LEFT WALL-
-RIGHT WALL-
-CEILINGS-
-FLOORS-
-DOORS-
-CLOSETS-
-WINDOWS-
.
[7.15 cm] x [14.67 cm] x [0.78 cm]
.
-PLACE [iPHONE] IN [MAGNETIC CASE]-
-VERTICAL RECTANGLE-
.
-ATTACH [iPHONE MAGNETIC CASE] TO A “WIRELESS MAGSAFE CHARGER”-
.
-ADD A [“VELCRO HOOK” STRIP] TO THE BACK OF THE “MAGSAFE CHARGER”-
-“MAGSAFE CHARGER” IS A CIRCLE WITH [6 CM] DIAMETER-
-[VELCRO STRIPS] ARE [5 CM] WIDE-
.
-CUT A [“VELCRO FLUFF” STRIP] LONGER THAN THE “HEIGHT” OF THE iPHONE-
[14.67 CM]
-USE [METER STICK] TO MEASURE THE STRIP-
-CUT TO [~24 CM]-
.
-MARK THE [MIDPOINT] WITH A [YELLOW LABEL]-
[12 CM] X [2.5 CM]
-MARK THE [LEFT SIDE] OF THE [YELLOW LABEL] TO MARK THE “HEIGHT MIDPOINT”-
-POKE A HOLE WITH [THUMB TACK] TO MARK THE “WIDTH MIDPOINT”-
-PEEL OFF THE “ADHESIVE COVER” FROM THE STRIP-
-STICK THE STRIP TO THE CORNER OF A “POSTER”-
-CUT OUT THE STRIP-
-ALIGN THE [“MAGSAFE CHARGER” CENTER LIGHTNING BOLT] WITH THE “STRIP MIDPOINT”-
-ADJUST POSITION OF THE “MAGSAFE CHARGER” SO THAT IT ONLY PROTRUDES FROM 1 SIDE-
(SO THAT YOU CAN ALIGN THE OTHER SIDE AS A “STRAIGHT EDGE”)
(OR JUST ALIGN THE “STRAIGHT EDGE” OF THE “iPHONE MAGNETIC CASE” TO THE SIDE OF A [WALL/WINDOW])
-USE “RIGHT GLOVE” TO INSERT “PUSH PINS”-
-USE 2 [HEAVY DUTY PUSH PINS] AT THE [STRIP ENDPOINTS] TO ATTACH [STRIP] TO [WALL POSTERBOARD]-
-USE 4 [FLAT PUSH PINS] TO SECURE THE 4 CORNERS AROUND THE “MAGSAFE CHARGER”-
-ATTACH [iPHONE] TO [MAGSAFE CHARGER]-
-ROTATE 360°-
.
-ALIGN THE STRIP VERTICALLY WITH A “WALL CORNER”-
[7.15 cm] x [14.67 cm] x [0.78 cm]
.
.
*OUR CURRENT [iPAD]* —>
*iPAD GENERATION 9* —>
(WIFI-ONLY)
[17.41 cm] x [25.06 cm] x [0.75 cm]
*HORIZONTAL MIDPOINT* —> [8.705 CM]
*VERTICAL MIDPOINT* —> [12.53 CM]
.
([30.514 CM] DIAGONAL)
*ARQ* —> 0.695
(LESS “VERTICAL” THAN [9:16])
-487 GRAMS-
.
-OPEN THE CASE SO THAT THE “LENS HOLE” IS IN [TOP RIGHT CORNER]-
-[iPAD LENS] 1 IS IN THE [TOP LEFT CORNER] OF [iPAD REAR]-
-ALIGN THIS LENS WITH THE “LENS HOLE”-
-ADD [[5CM X 5CM] “VELCRO HOOK” SQUARES] TO ALL 4 CORNERS OF EACH LARGE “BACK SIDE”-
.
-2 HORIZONTAL VELCRO FLUFF STRIPS-
-MUST BE LONGER THAN [17.41 CM]-
-ADD [5 CM] TO EACH SIDE-
-SO CUT [28 CM] STRIPS-
-BACK THE STRIPS WITH “POSTER-BOARD CUT-OUTS”-
.
-2 VERTICAL VELCRO FLUFF STRIPS-
-MUST BE LONGER THAN [25.06 CM]-
-ADD [5 CM] TO EACH SIDE-
-SO CUT [40 CM] STRIPS-
-BACK THE STRIPS WITH “POSTER-BOARD CUT-OUTS”-
.
*FRONT-FACING LENS* —>
-attach ‘velcro strip’ to back of iphone with ‘hook side’ facing up-
*take a ‘fluff strip’ and attach a ‘black paper strip’ to adhesive side*
*place ‘patafix’ on 4 corners of ‘black paper strip’*
*attach ‘black paper strip’ to wall*
.
*REAR-FACING LENS* —>
*place ‘black paper strip’ on the front of your iphone*
*attach ‘paper strip’ to iphone by wrapping a ‘velcro elastic strip’ around center of iphone*
*attach the ‘velcro portion’ of ‘elastic strip’ in back of iphone*
.
.
*👨🔬🕵️♀️🙇♀️*SKETCHES*🙇♂️👩🔬🕵️♂️*
.
.
👈👈👈☜*“OUR TRANSFORMERS”* ☞ 👉👉👉
.
.
💕💝💖💓🖤💙🖤💙🖤💙🖤❤️💚💛🧡❣️💞💔💘❣️🧡💛💚❤️🖤💜🖤💙🖤💙🖤💗💖💝💘
.
.
*🌈✨ *TABLE OF CONTENTS* ✨🌷*
.
.
🔥🔥🔥🔥🔥🔥*we won the war* 🔥🔥🔥🔥🔥🔥