.
-as of [12 JANUARY 2025]-
.
-[3RD-PARTY] FREE APP-
.
.
-2 TABS-
-PROTRACTOR-
-ANGLE-
.
*PROTRACTOR* —>
.
-THE [BLUE HORIZONTAL LINE] DENOTES [1 SIDE] OF YOUR [ANGLE]-
(IT WILL BE TILTED SLIGHTLY DOWNWARD)
.
.*TOP RIGHT CORNER* —>
(DISPLAYS [0°] WHEN ONLY 1 [SIDE] OF [ANGLE] IS VISIBLE)
.
*[PRESS/DRAG/RELEASE] THE [ENDPOINT] OF THE [LINE SEGMENT] TO SET [POSITION] OF [ENDPOINT] OF 2ND [LINE SEGMENT]-
.
*DRAG THE 2ND [LINE SEGMENT] TO THE [90° MARK]* —>
.
*THE [MEASUREMENT] OF THE [ANGLE] BETWEEN THE 2 [LINE SEGMENTS] IS DISPLAYED IN [TOP RIGHT CORNER]* —>
.
*MAXIMUM “ANGLE SIZE” IS [180°]* —>
(though i can only set it to [179°])
.
(YOU CAN ADJUST ANGLE BY [1°])
.
-YOU CANNOT MOVE THE [VERTEX]-
.
*IT STAYS [ANCHORED] IN THE [MIDDLE] OF [LEFT SIDE] OF YOUR [SCREEN]* —>
.
*TAP [M] IN [TOP LEFT CORNER] TO HORIZONTALLY “LEVEL” YOUR FRAME* —>
.
*AFTER TAPPING [M BUTTON], IT CHANGES TO AN [A BUTTON]* —>
.
*TAP THE [A BUTTON] TO RETURN TO THE [ANGLE INPUT] SCREEN* —>
.
*TAP [M BUTTON] TO RETURN TO THE [LEVEL] SCREEN* —>
.
*TOP RIGHT CORNER* —>
.
-TO [LEVEL] YOUR [CAMERA], ROTATE [iPHONE] UNTIL YOU GET 2 [90°] MEASUREMENTS-
.
-THERE WILL BE A [BLUE HORIZONTAL LINE] RUNNING THROUGH THE [CENTER] OF YOUR [FRAME]-
.
-YOU CAN ADJUST “ANGLE MEASURE” IN INCREMENTS OF [0.1°] BY ROTATING iPHONE [(COUNTER)-CLOCKWISE]-
.
-IF [TOP (WHITE) ANGLE MEASURE] IS LESS THAN [90°], ROTATE iPHONE CLOCKWISE-
-IF [TOP (WHITE) ANGLE MEASURE] IS GREATER THAN [90°], ROTATE iPHONE [COUNTER-CLOCKWISE]-
.
-THE [BLUE HORIZONTAL LINE] MOVES ALONG WITH YOUR ROTATION BASED ON YOUR CURRENT “LEVEL”-
.
*TO LOCK YOUR SCREEN, TAP THIS BUTTON IN [BOTTOM RIGHT CORNER]* —>
.
-YOUR CURRENT FRAME IS [SAVED]-
-WHEN “LOCKED”, [CURRENT FRAME] WILL NOT CHANGE WHEN YOU MOVE [CAMERA LENS]-
.
*TO UNLOCK YOUR SCREEN, TAP THIS BUTTON IN [BOTTOM RIGHT CORNER]* —>
.
*ANGLE METER* —>
.
*TAP THIS BUTTON IN [TOP LEFT CORNER] TO ADD [IMAGE] FROM YOUR [iPHONE]* —>
.
*TAP THIS BUTTON IN [BOTTOM LEFT CORNER] TO LOCK YOUR CURRENT FRAME* —>
.
*TAP THIS BUTTON IN [BOTTOM LEFT CORNER] TO UNLOCK YOUR CURRENT FRAME* —>
.
*TAP THE [PLUS BUTTON] IN [BOTTOM RIGHT CORNER]* —>
.
*A [HORIZONTAL LINE SEGMENT] APPEARS IN THE [CENTER] OF YOUR [FRAME]* —>
.
*3 [WHITE CIRCLES] MARK YOUR [IN/MID/OUT POINTS]* —>
.
-YOU CAN [PRESS/DRAG/DROP] ANY OF THE 3 POINTS TO ANOTHER LOCATION IN THE FRAME-
(BUT YOU CAN ONLY MOVE 1 POINT AT A TIME)
.
-THE [DEGREE] OF THE [CLOCKWISE ANGLE] BETWEEN [LEFT LINE SEGMENT] + [RIGHT LINE SEGMENT] IS DISPLAYED-
-AS YOU DRAG [POINTS], YOU CAN CHANGE THE [ANGLE] IN INCREMENTS OF [1°]-
.
*TAP THIS [BUTTON] IN [BOTTOM CENTER] OF [FRAME] TO DISPLAY THE DEGREE OF THE [“COUNTER-CLOCKWISE” ANGLE] BETWEEN [RIGHT LINE SEGMENT] + [LEFT LINE SEGMENT]* —>
.
.
*TAP THIS BUTTON TO MEASURE THE COMPLEMENTARY ANGLE* —>
.
*TO DELETE YOUR MOST RECENTLY ADDED “LINE SEGMENT”, TAP THE [MINUS BUTTON] IN [BOTTOM RIGHT CORNER]* —>
.
*TO DELETE ALL “ANGLE METER OVERLAYS”, TAP THE [TRASH BUTTON] IN [BOTTOM LEFT CORNER]* —>
.
.
*👨🔬🕵️♀️🙇♀️*SKETCHES*🙇♂️👩🔬🕵️♂️*
.
.
.
.
💕💝💖💓🖤💙🖤💙🖤💙🖤❤️💚💛🧡❣️💞💔💘❣️🧡💛💚❤️🖤💜🖤💙🖤💙🖤💗💖💝💘
.
.
*🌈✨ *TABLE OF CONTENTS* ✨🌷*
.
.
🔥🔥🔥🔥🔥🔥*we won the war* 🔥🔥🔥🔥🔥🔥
Leave a Reply