.
-as of [1 MAY 2024]–
.
*KEYBOARD SHORTCUT* –>
(
.
.
.
.
—YOU CAN [MUTE/SOLO] “SOURCE CLIPS”-
(BUT YOU WILL HAVE TO ADD [CLIP] TO [SEQUENCE] BEFORE YOU CAN [PAN CLIP] OR [ADD KEYFRAMES]
-SELECT THE [CLIP] IN THE [TIMELINE]-
-NAVIGATE TO [AUDIO CLIP MIXER]-
.
.
.
.
*SET ‘CLIP VOLUME’*
*SET ‘CHANNEL VOLUME’*
*SET ‘CLIP PAN”*
.
*LEFT METER* –>
.
.
(measured in “deci-bels”)
(-67 to 15)
(for a range of ’82 deci-bels’)
.
*the ‘numeric decibel value’ is displayed in ‘blue’ under the meter…* –>
.
*CLICK IT + ENTER A SPECIFIC “DECIBEL VALUE”*
(ADJUST IN INCREMENTS OF [+/- 0.1] DECIBELS)
.
*LOWEST VALUE* —>
-99.9
(ALTHOUGH THE [DECIBEL VERTICAL RULER] ONLY DISPLAYS DOWN TO [-67])
.
*IF YOU INPUT [-100 OR LOWER], THE “NEGATIVE INFINITY” SYMBOL IS DISPLAYED* —>
.
*IF YOU CLICK INTO IT, IT WILL DISPLAY [-100]* —>
.
*HIGHEST VALUE* —>
[15 DECIBELS]
.
(IF YOU [CLICK/HOLD] THE [DECIBEL INPUT BOX], YOU CAN USE [POINTER] TO INCREASE/DECREASE [CLIP VOLUME] IN INCREMENTS OF [+/- 0.1 DECIBELS])
.
-DRAG [DOWN/LEFT] TO DECREASE [VOLUME]–
-DRAG [UP/RIGHT] TO INCREASE [VOLUME]–
.
*THE [BOTTOM LEFT CORNER] DISPLAYS THE “TRACK #” IN [TIMELINE]* —>
.
*TO THE RIGHT OF “TRACK #” IS “TRACK NAME”*
.
*CLICK INTO THE [TRACK NAME BOX] + TYPE IN A NEW “TRACK NAME”* —>
.
-HIT [RETURN]-
.
.
*IF YOU SELECT “SHOW VALLEYS”, THERE WILL BE A HORIZONTAL LINE DESIGNATING THE “LOWEST VOLUME” OVER DURATION OF PLAYBACK AS YOU PLAY BACK THE TRACK* —>
.
*IF YOU SELECT “SHOW COLOR GRADIENT”, THE “PLAYBACK BAR COLOR” WILL GRADUALLY CHANGE AS VOLUME CHANGES IN PLAYBACK* —>
(OTHERWISE, THE COLOR CHANGES DISCRETELY)
.
*IF YOU SELECT “SHOW PEAKS”, A [YELLOW HORIZONTAL LINE] WILL APPEAR AT BOTTOM OF “VOLUME METER”* —>
.
*TO SEE WHETHER “DYNAMIC PEAKS” OR “STATIC PEAKS” ARE SELECTED, HOVER POINTER OVER “DYNAMIC/STATIC” IN CONTEXT MENU* —>
(THE SELECTED “PEAK TYPE” WILL HAVE A [DOT] TO LEFT OF ITS NAME)
.
-[DYNAMIC PEAKS] UPDATE EVERY SECOND DURING PLAYBACK-
(AND DISAPPEAR ONCE YOU STOP PLAYBACK)
.
-[STATIC PEAKS] DISPLAY THE HIGHEST VOLUME REACHED OVER COURSE OF PLAYBACK-
(AND REMAIN VISIBLE AFTER YOU STOP PLAYBACK)
.
*THE [PEAK VALUE] IS NUMERICALLY DISPLAYED AT THE [BOTTOM RIGHT] OF [AUDIO METER]* —>
.
*IT CHANGES AS YOU PLAY BACK THE AUDIO*
.
-[CHANNEL VOLUME] REFERS TO [LEFT/RIGHT CHANNELS] OF A [STEREO TRACK]-
.
*ADJUST [CHANNEL VOLUME] FOR A CLIP IN “EFFECTS CONTROL PANEL”* —>
.
*IN [AUDIO CLIP MIXER], SELECT [SHOW CHANNEL VOLUME] TO DISPLAY A [BLUE HORIZONTAL LINE] IN [AUDIO METER] INDICATING THE “CHANNEL VOLUME LEVEL”* —>
.
*IF YOU HOVER POINTER ON RIGHT SIDE OF THE [AUDIO METER], THE “CHANNEL VOLUME INDICATOR LINE” SEPARATES (FURTHER) INTO 2 [BOX SLIDERS]* —>
.
-[CLICK/HOLD/DRAG/DROP] THESE [SLIDERS] TO ADJUST [L/R CHANNEL VOLUME]-
-[CLICK/HOLD/DRAG/DROP] THE [LEFT WHITE SLIDER] TO ADJUST [OVERALL CLIP VOLUME]-
.
-[DEFAULT VOLUME] IS [0 DECIBELS]-
.
-TO RETURN VOLUMES TO [0 DECIBELS], [DOUBLE-CLICK] THE SLIDERS-
.
What you learned:
Adjust audio
The Audio Clip Mixer panel allows you to change the volume of an audio clip.
Choose Window > Audio Clip Mixer to display the panel.
Position the Timeline playhead over the clip you want to change.
Drag the Audio Clip Mixer fader up or down for the sequence track containing the clip.
Audio level is usually described with 0dB (decibels) being the loudest, so –3dB is quieter than 0dB.
Use the Mute and Solo buttons to selectively hear audio tracks.
Mute makes a selected track silent.
Solo plays only the selected track.
Use the Pan control in the ‘Audio Clip Mixer to direct the clip’s sound toward the left or right output in your ‘sound mix’
.
.
*👨🔬🕵️♀️🙇♀️*SKETCHES*🙇♂️👩🔬🕵️♂️*
.
.
👈👈👈☜*-[PREMIERE PRO] PANELS-* ☞ 👉👉👉
.
.
💕💝💖💓🖤💙🖤💙🖤💙🖤❤️💚💛🧡❣️💞💔💘❣️🧡💛💚❤️🖤💜🖤💙🖤💙🖤💗💖💝💘
.
.
*🌈✨ *TABLE OF CONTENTS* ✨🌷*
.
.
🔥🔥🔥🔥🔥🔥*we won the war* 🔥🔥🔥🔥🔥🔥